CNC Stepper Motor Driver 6 Axis Interface Board adapter
Connection for 6 drivers and control 6 motors in the same time.
Built in DB25 male connector.
DB25 Output Pin:P1,P2,P3,P4,P5,P6,P7,P8,P9,P14,P16,P17.
DB25 Input Pin: P10,P11,P12,P13,P15.
DB25 GND Pin: P18-P25.
Power voltage is 5VDC and support with MACH3 etc. software
Built in Optical-coupler.
Connection for 6 drivers and control 6 motors in the same time.
Built in DB25 male connector.
DB25 Output Pin:P1,P2,P3,P4,P5,P6,P7,P8,P9,P14,P16,P17.
DB25 Input Pin: P10,P11,P12,P13,P15.
DB25 GND Pin: P18-P25.
Power voltage is 5VDC and support with MACH3 etc. software
Built in Optical-coupler.
Features:
Dimensions:
DB25-1205F
Close
90.0mm x 63.0mm x height 19.0mm
6 Axis Line Printer Port