- The output of the input signal by the number of full-dedicated high-speed processing chip, the signal correction, amplification, removes unnecessary interference signal, so that machine run more stable.
- The computer's LPT port power supply and other parts of the isolated power supply, so that between the computer and the machine can effectively isolate. Thus further ensuring the security and stability. Make computers and data more secure machining
- A total of five input signals to communicate with the host computer, all via the optical coupling isolation, can be set to: limit switch, start, stop, spindle speed input, MPG input, etc. any selected five functions.
- 12 output signals are available. It can support up to 6 axis control output. You can only choose one of these or several axes to control. This 12 outputs some are functional reuse. In use, an output port can only be used when a function.
- Three ad hoc support MACH3 software programmable control relay. By controlling the MACH3 software, you can control any one of the relay on and off. Each relay has energized leds. The three relays can be used to control liquid coolant, coolant mist, gas liquid coolants. It can also be used to control devices such as solenoid valve power switches.
- Ad hoc high-speed optical coupling isolation to control the spindle speed. It can be output within 2.5KHZ PWM signal output port for the parallel port P1. This interface board has a PWM converted 0-10V of a D / A circuits. 0-10V. Only analog speed control inverter to control the spindle speed. It is noted that the PWM output with 0-10V output can only choose one. It can not be used simultaneously.
- The interface board can be connected common cathode or common anode output to stepper drives or servo drives (servo drive must support digital signal). 5V output level.
- 24VDC supply required.
6 Axis Line Printer Port
Features:
Dimensions:
DB25M-3R6A
Close
111 mm x 86 mm x height 19 mm