TB6600HG subdivision-type two-phase hybrid stepping motor drive using DC 12 ~ 48V power supply, suitable for drive
Two-phase hybrid stepping motor dynamic voltage 12 to 48V, the current is less than 5A outer diameter of 35 to 86 mm. This drive using the drive's current loop subdivision control, the motor torque ripple is very small, low-speed running is very smooth, almost no vibration and noise. High-speed torque is much higher than other two-phase drive, high positioning accuracy. Widely used in the engraving machine, CNC machine tools, packaging machinery and other high resolution requirements on the device.
Two-phase hybrid stepping motor dynamic voltage 12 to 48V, the current is less than 5A outer diameter of 35 to 86 mm. This drive using the drive's current loop subdivision control, the motor torque ripple is very small, low-speed running is very smooth, almost no vibration and noise. High-speed torque is much higher than other two-phase drive, high positioning accuracy. Widely used in the engraving machine, CNC machine tools, packaging machinery and other high resolution requirements on the device.
- 32 stepper motor subdivision 42,57,86 type of 2-phase 4-phase
- 9V-42V DC power supply
- H-bridge bipolar constant phase flow drive
- Maximum output current of 4.0A
- Up to 32 segments of six kinds of sub-modes
- High-speed optically isolated input signal
- Common anode single pulse interface standard
- Off hold function
- To provide energy-efficient semiautomatic current lock function
- Built-in thermal protection and over-current protection
1-Axis Stepper Drive.
Max 48V DC / 4.0A.
Max 48V DC / 4.0A.
Features:
Dimensions:
TB6600HG
Close
Width Length 82 x 50 x high 35 (MM)