www.StepperMotorCanada.ca is owned and operated by Pro Power Electric. Copyright (C) 2019. All rights reserved.
                    No material may be reproduced in part or in whole without written consent from holders.
HTD3M - 15mm wide
White - Stainless steel cord

Open Loop Belt - Price per foot
Price $9.00
HTD3M - 20 tooth, aluminum
8.0 mm bore, 16mm wide,
double flanged pulley
Price $10.00
1/2" to 1/2" ID - 1.5" W
  

Flexible Aluminum Motor Shaft Coupler:
Other timing belts and pulleys available. If you need something not listed please contact us.
HTD3M - 20 tooth, aluminum
1/4" bore, 16mm wide,
double flanged pulley
HTD3M - 60 tooth, aluminum
16mm wide,
double flanged pulley
HTD3M - 90 tooth, aluminum
16mm wide,
double flanged pulley
HTD3M - 30 tooth, aluminum
16mm wide,
double flanged pulley
HTD3M - 24 tooth, aluminum
1/4" bore, 16mm wide,
double flanged pulley
Price $10.00
Price $10.00
Price $12.00
Price $17.00
Price $27.00
HTD3M - 300L (100 tooth)
HTD3M - 390L (130 tooth)
HTD3M - 480L (160 tooth)
Price $7.00
Price $10.00
Price $13.00
HTD3M - 240L (80 tooth)
Price $5.00
Price $8.00
Timing Belts 15mm Wide, Closed Loop:
Price $4.00
1/4" to 1/4" ID - 1.0" W
8mm to 8mm ID - 25mm W
5mm to 6mm ID - 25mm W
Price $8.00
Price $8.00
Price $25.00
Where can I buy timing belts and pulleys?
Timing belts and pulleys Canada.
Timing belts and pulleyss Ontario.
Timing belts and pulleys Alberta.
Timing belts and pulleys British Columbia.
Timing belts and pulleys Saskatchewan.
Where can I buy CNC timing belts and pulleys locally?
HTD timing belts. HTD pulleys. HTD pinions.
HTD3 for CNC stepper motors.
Home made CNC machine.
Home built CNC router.
Home built CNC table.
Home made CNC router.


steppermotorcanada011008.png steppermotorcanada008001.png
HTD3M - 270L (90 tooth)
Price $6.00
HTD3M - 330L (110 tooth)
Price $9.00
GT2 - 20 tooth aluminum
5.0 mm bore, 7mm wide,
double flanged pulley
Price $5.00
Price $25.00
Price $2.00
HTD3M - 360L (120 tooth)
Price $9.00
steppermotorcanada011006.png
Motor Mounting L-Bracket
Motor Stand-Off Mounting Bracket
Nema 34
Nema 23
Nema 17
Use the motor stand off when joining motor shafts to drive shafts. Perfect spacing when using a flexible motor shaft coupling. Allows for easy access to set screws. Made from solid aluminum (Nema 23) and extruded aluminum (Nema 34).
Nema 34
Nema 23
Nema 34
Nema 23
12 mm to 1/2" ID - 1.5" W
  

  
  

12 mm to 12mm ID - 1.5" W
  

  
  

Price $25.00
HTD3M - 450L (150 tooth)
HTD3M - 420L (140 tooth)
Price $13.00
Price $10.00
Mounting L-brackets are a quick and easy way of mounting your stepper motor. Made from angle supported steel with powered coated finish.
Price $15.00
Price $25.00
Price $21.00
Price $14.00
Price $9.00
HTD3M - 15mm wide
Black - Nylon cord

Price $6.00
HTD3M - 6mm wide
Black - Nylon cord

GT2 - 3mm wide
Black - Nylon cord

flag.png
Contact us
About us
Store
Nema 34
Nema 23
Electronics
Drivers
Mechanical
Nema 17
Power Supplies
steppermotorcanada002007.png
Add a little J.B.Weld to your pulleys
or couplers to stop loosening set screws.

Have a D shaft stepper motor but have
a keyed shaft pulley? Match them up
by pouring in some J.B.Weld.

To pull apart, just use a standard gear
puller.

  
Tip!
Timing Pulleys:
GT2 - 16 tooth aluminum
5.0 mm bore, 7mm,
double flanged pulley
Price $5.00
White
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
HTD3M
GT2
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
Price $12.00
addtocart.png
Price $17.00
Price $27.00
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
12.0 mm bore
1/2" bore
12.0 mm bore
1/2" bore
12.0 mm bore
1/2" bore
addtocart.png
addtocart.png
addtocart.png
addtocart.png
viewcart.png