New stock has arrived!

steppermotorcanada009025.png steppermotorcanada009024.png steppermotorcanada009023.png
This breakout board is designed for debugging and for simple access of the printer port. Pin to terminal clearly labeled for ease of connection. Will work with Mach3 CNC software, but provides no optocoupler protection or signal boost.
DB25-F2 Break-out board
Price $20.00
This break-out board is designed to work with Mach3 CNC software and is simple to use.
It has connection for 6 drivers and 5 inputs.
Power supply of +5Vdc is required (usb port).
Built in C-class optocouplers.
DB25-1205F, 6 Axis Break-out board
Out of Stock
This break-out board is designed to work with Mach3 CNC software utilizing the line printer port for communication.
Control up to 6 drivers and 5 inputs.
24 vdc power supply is required.

Out of Stock
DB25M-3R6A, 6 Axis Break-out board
www.StepperMotorCanada.ca is owned and operated by Pro Power Electric. Copyright (C) 2019. All rights reserved.
                    No material may be reproduced in part or in whole without written consent from holders.
steppermotorcanada002002.png steppermotorcanada002002.png
This break-out board is designed to work with Mach3 CNC software and is simple to use.
It has connection points for 5 drivers, 5 inputs, 1 relay, PWM (10v) for spindle control.
Power supply of +5Vdc is required (usb port).
DB25-1R5AM, 5 Axis Break-out board
Price $35.00
steppermotorcanada002002.png steppermotorcanada009022.png
25 Pin Parallel DB25 Printer Cable
Male to Female
2.7M - 8.8 Feet
Off white
Printer Cable
Price $15.00
steppermotorcanada009021.png
15A 125/250 Vac, 0.6A 125Vdc, 0.3A 250Vdc.
Single pole, double throw,
normally open, normally closed.
Momentary Roller Lever.
Limit Switch V-156-125
Price $8.00
steppermotorcanada009020.png
MACH3 USB Interface Board
5 Axis CNC Breakout Board.
100 KHz Axis Controller.
Comes with USB cable.
NVUM5-SP USB MACH3 Interface Board
Red Mushroom 40mm head.
Cut out hole size 22mm.
600 Vac 10 Amps.
Normally Open, Normally Closed.
Price $25.00
Emergency Switch
Note: Female DB25
Note: Female DB25
Note: Male DB25
Note: Male DB25
steppermotorcanada002002.png
Mach3 basic setup manual for the above break-out boards. Use in conjunction with break-out board manual. Good for first time setup.
Generic BOB Connection Manual
 Read: "More info about break-out boards."
DB25 25Pin LPT Printer to PCI-E Express Card Converter Adapter. Use with computers that require a printer port or to add a second parallel port to expand you I/O connections.
Parallel Port PCI-E Express Card
Price $25.00
steppermotorcanada002002.png
Out of Stock
Program the Ardruino Uno to control your stepper motor driver. Each arduino is programmed with a simple code to run a stepper motor in a forward / reverse pattern. Comes with colour coded hookup wire, 0.3m USB cable and 9V battery adapter to make connections easy.
UNO R3 ATmega328P Development Board With Boot Loader For Arduino UNO SM
Out of Stock
Stand alone pulse generator. When used with a stepper motor driver and motor you can control your stepper motor speed and direction. 3 speed memory locations. 5 selectable accelleration rates. Start / Stop button. Foward / Reverse button. Hold / release button.
Stepper Accell - M3 - Pulse Generator
steppermotorcanada002002.png
Price $49.00
Step-Down Voltage Power Module. Use the module in conjunction with your high voltage power supply to access lower voltages without the use of a second power supply.
Input 40Vdc-40Vdc.
Output 5A 180W, 2V-36V.
Price $12.00
DC-DC Buck Converter
GX16-4 Male & Female Panel.
Metal Connector, silver.
16mm, 4 pin.
Aviation Plug 4 Pin
Price $12.00
380V 10A, Dual Row.
12 position screw terminal strip.
Can be easily cut into sections.
Terminal Block
Price $4.00
Note:
steppermotorcanada009004.png
Price $Free
steppermotorcanada009017.png steppermotorcanada009016.png
MACH3 USB Interface Board
6 Axis CNC Breakout Board.
200 KHz Axis Controller.
Comes with USB cable.
NVUM6-SP USB MACH3 Interface Board
steppermotorcanada002002.png
Price $220.00
steppermotorcanada009015.jpg steppermotorcanada009014.png steppermotorcanada009013.png steppermotorcanada009012.png
12VDC 0.2A, 2Pin, double ball-bearing.
80 x 80 x 25mm.
Brushless cooling fan with matching grill.
12VDC Cooling Fan
Price $20.00
Panel mount chassis fuse holder.
Use with 6x30mm glass fuses.
15A 125V, fuses not included.
 
Fuse Holder
Price $5.00
UNO Driver for Windows
Stepper Sketch
Installation disc included.
Driver.
Driver.
steppermotorcanada002002.png steppermotorcanada009010.png
GX20-4 Male & Female Panel.
Metal Connector, silver.
20mm, 4 pin.
400V-5A.
Aviation Plug 4 Pin
Price $18.00
steppermotorcanada009009.png
Great relay for break out boards and Arduinos.
Input trigger voltage 3-32Vdc.
Controlled voltage 24-380Vac, 25A.
Solid State Relay DC/AC 40Amp
Price $12.00
Great relay for break out boards and Arduinos.
Input trigger voltage 3-32Vdc.
Controlled voltage 6-60Vdc, 25A.
Solid State Relay DC/DC 25Amp
Out of stock
Where can I buy break-out boards? Stepper Motor Canada.
CNC break-out boards Canada.
CNC USB break-out boards Ontario.
Arduino CNC Alberta.
Electronic connectors CNC British Columbia.
Electronic parts Saskatchewan.
Where can I buy CNC electronics locally?
CNC parts and accessories.
Mach3 break-out boards.


steppermotorcanada002006.png steppermotorcanada008001.png
PG7
 
Nylon Cable Gland
$2.00
steppermotorcanada009008.png
PG9
 
$2.00
PG11
 
$2.50
PG13.5
 
$2.50
PG16
 
$3.00
PG21
 
$4.00
Use this kit with an Arduino Uno (sold separate).
Comes with 35HY26-0284 stepper motor,
L298N DC Stepper Motor Driver.
Nema14 Motor & Driver Kit
Price $30.00
MACH3 USB Interface Board
3 & 4 Axis CNC Breakout Board.
200 KHz Axis Controller.
Comes with USB cable.
AKZ250 USB MACH3 Interface Board
steppermotorcanada002002.png
Out of stock
Driver.
steppermotorcanada009006.png
Use this switch with your Arduino Uno (sold separate) or with any breakout board for solid state switching.
Mosfet Switch Module
Price $6.00
3 Axis.
Call for price
4 Axis.
14 AWG
 
Hook Up Wire, Stranded TEW Per Meter
$0.75
16 AWG
 
$0.66
18 AWG
 
$0.57
MACH3 USB Interface Board
5 Axis CNC Breakout Board.
100 KHz Axis Controller.
Comes with USB cable.
BL5 CNC USB Interface Board
steppermotorcanada002002.png
Driver.
Call for price
For any of the usb cards to work, you must have the .ddl file (driver) installed in the Mach3 plugins file folder. Without the file properly installed, they will not work.
This arduino is programmed as a speed controller with forward and reverse. Set the potentiometer in it's center location for off position. Turn pot to the right for one direction, left for opposite direction.
The farther the pot is turned the faster the motor will spin. Comes with colour coded hookup wire, 0.3m USB cable, 9V battery adapter and 10K pot to make connections easy.
UNO R3 ATmega328P Development Board Stepper Motor Speed Controller
Out of Stock
steppermotorcanada009004.png
UNO Driver for Windows
Stepper Sketch
LED panel mount pilot light.
120 Vac - 20 mA
20 mm

 
Pilot Light
Price $5.00
Hook Up Wire, Stranded TEW Kit
Kit includes:

3m of black 16 AWG (power supply to driver)
3m of red 16 AWG (power supply to driver)
3m of black 18 AWG (breakout board to driver)
3m of red 18 AWG (breakout board to driver)
3m of green 18 AWG (breakout board to driver)
3m of blue 18 AWG (breakout board to driver)
Six axis LPT breakout board designed to work with Mach3 CNC software.
Supports up to six Step/Dir stepper drives.
9 LED indicators to simplify setup.
12 vdc power supply required.
BBC Breakout, 6 Axis Break-out board
Out of Stock
steppermotorcanada002002.png
Note: Male DB25
steppermotorcanada009002.png
Use this kit with an Arduino Uno (sold separate).
Comes with 1:64 geared 28BYJ-48 stepper motor,
ULN2003 DC Stepper Motor Driver.
Geared Stepper Motor & Driver Kit
Price $20.00
Printer Port Break Out Boards. "BOB's"
USB Port Break Out Boards.
Size
 
Price each.
Size
 
Price
The USB port on all of the line printer BOB's is used for 5 Vdc supply only.
It is not used for communication or motor control.
 Note:
Note:
Click for dimensions.
Programmable boards and accessories.
flag.png
Contact us
About us
Store
Nema 34
Nema 23
Electronics
Drivers
Mechanical
Nema 17
Power Supplies
steppermotorcanada002007.png
Requires Stepper motor and driver
Requires Stepper motor and driver
steppermotorcanada008005.png steppermotorcanada008004.png
More Info.
More Info.
More Info.
More Info.
More Info.
More Info.
More Info.
More Info.
More Info.
More Info.
Each Uno has been tested and programmed before shipping.
moreinfo.png
Price $10.00
ssr40da.png ssr25.png pilotlights.png bl5breakoutboard.png
Stepper Sketch
Stepper Sketch
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
Red
 
Green
 
Price $5.00
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
Red
 
Grn
 
Blu
 
Blk
 
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
addtocart.png
viewcart.png