wwwbanner.png flag.png
4 wire, 1.8 degree, 2 phase, 2.8 Amp
Single 1/4" D-shaft
267 oz-in, 57HS76-2804-05, Nema 23
4 wire, 1.8 degree, 2 phase, 3.0 Amp
Single 8mm D-shaft
311 oz-in, 57HS82-3004, Nema 23
Price $50.00 CAD
Price $55.00 CAD
The above motors are available with dual shaft . Other motors can be ordered in round shaft, keyed shaft, standard and metric sizes.
Dual Shaft Stepper Motors, Nema 23
Price $ Call CAD
www.StepperMotorCanada.ca is owned and operated by Pro Power Electric. Copyright (C) 2016. All rights reserved.
                    No material may be reproduced in part or in whole without written consent from holders.
stepper-motors-cnc-canada002007.png stepper-motors-cnc-canada002008.png stepper-motors-cnc-canada002008.png
Nema 23 1545 Micro Stepper Driver
Price $80.00 CAD
20Vdc-50Vdc, 1.5 - 4.5 Amp, 2 Phase
Over voltage, over current, short circuit protection
Automatic idle-current reduction
stepper-motors-cnc-canada002006.png
4 wire, 1.8 degree, 2 phase, 4.2 Amp
Single 8mm D-shaft
396 oz-in, 57HS112-4204-03, Nema 23
Price $65.00 CAD
stepper-motors-cnc-canada002008.png
  Nema23 
 Model No.  
 Step
 Angle
 Degrees 
 Motor
 Length 
   mm
 Current 
 /phase
  Amps
 Resistance 
 /phase
   ohms
 Inductance 
 /phase
      mH
 Holding 
 Torque
   N.m
 # of
 leads 
 Detent
 Torque  
  g.cm
 Rotor
 Inertia 
 g.cm
 Mass 
 Kg
 Holding
 Torque
  Oz-In
57HS41-
2804
 1.8  41  2.8  0.7  1.4  0.55  4  250  150  0.47  78
57HS51-
2804
 1.8  51   2.8  0.83  2.2  1.01  4   350  280  0.68  143
57HS56-
1006
 1.8  56  1.0  7.4  10.0  0.9  6  350  280  0.68  127
57HS56-
2006
 1.8  56  2.0  1.8  2.5  0.9  6  350  280  0.68  127
57HS56-
3006
 1.8  56  3.0  0.75  1.1  0.9  6  350  280  0.68  127 
57HS56-
2804
 1.8  56  2.8  0.9  2.5  1.26  4  350  280  0.68  178
57HS76-
1006
 1.8  76  1.0  8.6  14  1.35  6  600  440  1.1  191
57HS76-
2006
 1.8   76  2.0  2.25  3.6  1.35  6  600  440  1.1  191
57HS76-
3006
 1.8  76  3.0  1.0  1.6  1.35  6  600  440  1.1  191
57HS76-
2804
 1.8  76  2.8  1.13  3.6  1.89  4  600  440  1.1  267
57HS82-
3004
 1.8  82  3.0  1.2  4.0  2.2  4  1000  600  1.2  311
57HS82-
5004
 1.8  82  5.0  0.6  1.5  2.2  4  1000  600  1.2  311
57HS112-
3004
 1.8  112  3.0 1.6  6.8  2.8  4  1200  800  1.4  396
57HS112-
4204
 1.8  112  4.2  0.9  3.8  2.8  4  1200  800  1.4  396
Step Angle ----------------------- 1.8 5%
Temperature Rise ------------- 80 Max
Ambient Temperature -------- -20 ~+50
Insulation Resistance--------- 100 MO Min., 500VDC
Dielectric Strength: ------------ 500VAC for 1 minute
Shaft Radial Play --------------- 0.02Max. (450g-load)
Shaft Axial Play ------------------ 0.08Max. (450g-load)
Max. Radial force---------------- 75N (20mm from the flange)
Max. Axial force------------------- 15N
General Specification:
Electrical specification:
Full List of NEMA 23 Stepper Motors:
stepper-motors-cnc-canada003002.png
4 wire, 1.8 degree, 2 phase, 2.8 Amp
Single 1/4" D-shaft
178 oz-in, 57HS56-2804-03, Nema 23
Price $45.00 CAD
stepper-motors-cnc-canada002008.png
Dual shaft in stock
Contact us
About us
Store
Home
Nema 34
Nema 23
Electronics
Drivers
Mechanical
Nema 17
Nema 23 Micro Stepper Driver 2DM556
Price $85.00 CAD
24Vdc-60Vdc, 1.0 - 4.0 Amp, 2 Phase
Over voltage, over current, short circuit protection
Automatic idle-current reduction
stepper-motors-cnc-canada002006.png stepper-motors-cnc-canada003001.png