wwwbanner.png flag.png
4 wire, 1.8 degree, 2 phase, 1.33 Amp
Single 5mm shaft
30 Oz-in, 42HS34-1334, Nema 17
4 wire, 1.8 degree, 2 phase, 1.68 Amp
Single 5mm shaft
50 Oz-in, 42HS40-1684, Nema 17
Price $ 23.00 CAD
Price $ 26.00 CAD
6 wire, 1.8 degree, 2 phase, 1.7 Amp
Single 5mm shaft
61 Oz-in, 42HS48-1684, Nema 17
Price $29.00 CAD
12Vdc-35Vdc, 0.2 - 2.0 Amp, 2 Phase
Over voltage, over current, short circuit protection
Automatic idle-current reduction
Nema 17 Micro Stepper Driver 0220
Price $50.00 CAD
Contact us
About us
Store
Home
Nema 34
Nema 23
Electronics
stepper-motors-cnc-canada002006.png stepper-motors-cnc-canada002008.png stepper-motors-cnc-canada002008.png stepper-motors-cnc-canada002008.png
Drivers
stepper-motors-cnc-canada002007.png
  Nema 17 
 Model No.  
 Step
 Angle
 Degrees 
 Motor
 Length 
   mm
 Current 
 /phase
  Amps
 Resistance 
 /phase
   ohms
 Inductance 
 /phase
      mH
 Holding 
 Torque
   N.m
 # of
 leads 
 Detent
 Torque  
  g.cm
 Rotor
 Inertia 
 g.cm
 Mass 
 Kg
 Holding
 Torque
  Oz-In
42HS34-
0956
 1.8  34  0.95  4.2  2.5  1.6  6  120  34  0.22  22.0
42HS34-
0406
 1.8  34   0.4  24  15  1.6  6   120  34  0.22  22.0
42HS34-
0316
 1.8  34  0.31  38.5  21  1.6  6  120  34  0.22  22.0
42HS34-
1334
 1.8  34  1.33  2.1  2.5  2.2  4  120  34  0.22  30.0
42HS40-
1206
 1.8  40  1.2  3.3  3.2  2.6  6  150  54  0.28  36.0 
42HS40-
0806
 1.8  40  0.8  7.5  6.7  2.6  6  150  54  0.28  36.0
42HS40-
0406
 1.8  40  0.4  30  30  2.6  6  150  54  0.28  36.0
42HS40-
1684
 1.8   40  1.68  1.65  3.2  3.6  4  150  54  0.28  50.0
42HS48-
1206
 1.8  48  1.2  3.3  2.8  3.17  6  260  68  0.35  44.0
42HS48-
0806
 1.8  48  0.8  7.5  6.3  3.17  6  260  68  0.35  44.0
42HS48-
0406
 1.8  48  0.4  30  25  3.17  6  260  68  0.35  44.0
42HS48-
1684
 1.8  48  1.68  1.65  2.8  4.4  4  260  68  0.35  61.0
42HS60-
1206
 1.8  60  1.2  6.0  7.0  5.6  6  280  102  0.35  78.0
42HM48-
1684
 0.9  48  1.7  1.7  4.1  4.4  4  250  68  0.35  61.0
Step Angle ----------------------- 1.8 5%
Temperature Rise ------------- 80 Max
Ambient Temperature -------- -20 ~+50
Insulation Resistance--------- 100 MO Min., 500VDC
Dielectric Strength: ------------ 500VAC for 1 minute
Shaft Radial Play --------------- 0.02Max. (450g-load)
Shaft Axial Play ------------------ 0.08Max. (450g-load)
Max. Radial force---------------- 28N (20mm from the flange)
Max. Axial force------------------- 10N
General Specification:
Electrical specification:
Full List of NEMA 17 Stepper Motors:
www.StepperMotorCanada.ca is owned and operated by Pro Power Electric. Copyright (C) 2016. All rights reserved.
                    No material may be reproduced in part or in whole without written consent from holders.
12Vdc-24Vdc, 0.2 - 2.0 Amp, 2 Phase
Open case design with heat sink
Decay and Excitation adjustment
20%,50% Automatic idle-current reduction
Nema 17 Stepper Driver ZK15004B
Price $20.00 CAD
stepper-motors-cnc-canada002006.png stepper-motors-cnc-canada002005.png stepper-motors-cnc-canada002004.png
Mechanical
Nema 17