wwwbanner.png flag.png
www.StepperMotorCanada.ca is owned and operated by Pro Power Electric. Copyright (C) 2016. All rights reserved.
                    No material may be reproduced in part or in whole without written consent from holders.
stepper-motors-cnc-canada002007.png
Digital stepper motor driver, 32-bit DSP.
20Vac-60Vac, 2.0-6.0 Amp, 2 Phase, AC / DC input.
Over voltage, over current, short circuit protection.
Automatic idle-current reduction.
Nema 34 Digital 2060AC Micro Driver
Price $120.00 CAD
stepper-motors-cnc-canada002006.png
Nema 23 Micro Stepper Driver 1545
Price $80.00 CAD
20Vdc-50Vdc, 1.5 - 4.5 Amp, 2 Phase
Over voltage, over current, short circuit protection
Automatic idle-current reduction
stepper-motors-cnc-canada002006.png
12Vdc-35Vdc, 0.2 - 2.0 Amp, 2 Phase
Over voltage, over current, short circuit protection
Automatic idle-current reduction
Nema 17 Micro Stepper Driver 0220
Price $50.00 CAD
stepper-motors-cnc-canada002006.png
The DM860AC is a digital stepper motor driver which adopts 32-bit DSP control technology and built-in microstepping technology.
18Vac-80Vac, 2.0-6.0 Amp, 2 Phase, AC / DC input.
Over voltage, over current, short circuit protection,
automatic idle-current reduction and built in fan.
Nema 34 Digital Stepper Driver DM860AC
Sale $110.00 CAD
stepper-motors-cnc-canada002006.png
Nema 23 Micro Stepper Driver 2DM556
Price $85.00 CAD
24Vdc-60Vdc, 1.0 - 4.0 Amp, 2 Phase
Over voltage, over current, short circuit protection
Automatic idle-current reduction
stepper-motors-cnc-canada002006.png
12Vdc-24Vdc, 0.2 - 2.0 Amp, 2 Phase
Open case design with heat sink
Decay and Excitation adjustment
20%,50% Automatic idle-current reduction
Nema 17 Stepper Driver ZK15004B
Price $20.00 CAD
stepper-motors-cnc-canada002006.png stepper-motors-cnc-canada002005.png stepper-motors-cnc-canada010010.png
The 2DM860H is the latest digital stepper motor driver which adopts 32-bit DSP control technology and built-in microstepping technology.
18Vac-80Vac, 2.0 - 6.0 Amp, 2 Phase, AC / DC input.
Over voltage, over current, short circuit protection,
automatic idle-current reduction and built in fan.
Nema 34 Digital Stepper Driver 2DM860H
Price $130.00 CAD
stepper-motors-cnc-canada002006.png
This controller connects to RJ45 connection ports on some stepper motor drivers allowing finer adjustments to the driver. Works with the 2DM860H, DM860AC, UCD20504, 2DM556.
Refer to the owners manual of your driver for specific use.
Handheld Intelligent Setting Unit
Price $30.00 CAD
Updated Product
On sale - limited stock
stepper-motors-cnc-canada004001.png stepper-motors-cnc-canada003001.png stepper-motors-cnc-canada010009.png stepper-motors-cnc-canada010008.png stepper-motors-cnc-canada010007.png stepper-motors-cnc-canada010006.png
Not all stepper motor drivers are the same.
A lot of drivers being sold on the web look exactly the same. Same black box, same cooling fins, same connection points and the same specs. However, have a look inside and you'll see there is a lot of differences. Cheap drivers are just that, cheap. They use old technology and outdated systems to provide a less expensive product.

There is also size and weight differences that cannot be easily seen on the web. If the product is lighter, what is it missing? If the product is smaller, where did all the parts go?

What if the model number is the same? They should be identical products? Unfortunately a lot of drivers are built around a main processing chip and this is how they label their driver. So even though they have the same or close to the same model number the parts they use can be very different from one driver to the other.
Contact us
About us
Store
Home
Nema 34
Nema 23
Electronics
Drivers
Mechanical
Nema 17
These 5 drivers are labeled as 860 models but they are not the same. As you can see, there are different resistors, different capacitors and there are even differences in the boards layout.

One of the drivers tested was not worth the money spent. It was noisy, overheated and constantly missed steps. Which one is it? By looking it's impossible to tell. It's not until you power up the board and start testing that you'll soon find out. By that time you've already spent your money.

Stepper Motor Canada has tested many drivers over the years and found a few models that are robust, smooth, quiet, cool running and in a price range that is competitive in the market.

 Are there better models on the market? Yes, there is always professional grade systems that exist but for the price range and perfomance our drives are well worth the money spent. Over the years, the quality of the drives has greatly improved and customer feed back has never been better.
Not all drivers provide 1 : 1 micro stepping. Check documentation to see what minimums are selectable.
Please Note: